IUTAM Symposium on Mechanics and Reliability of Actuating Materials - Proceedings of the IUTAM Symposium held in Beijing, China, 1-3 September, 2004

by Springer Netherland
State: New
VAT included - FREE Shipping
Springer Netherland IUTAM Symposium on Mechanics and Reliability of Actuating Materials - Proceedings of the IUTAM Symposium held in Beijing, China, 1-3 September, 2004
Springer Netherland - IUTAM Symposium on Mechanics and Reliability of Actuating Materials - Proceedings of the IUTAM Symposium held in Beijing, China, 1-3 September, 2004

Do you like this product? Spread the word!

£92.53 incl. VAT
Only 1 items available Only 1 items available
Delivery: between Friday, 3 June 2022 and Tuesday, 7 June 2022
Sales & Shipping: Dodax


Actuating materials hold a promise for fast-spreading applications in smart structures and active control systems, and have attracted extensive attention from scientists of both mechanics and materials sciences communities. High performance and stability of actuating materials and structures play a decisive role in their successive applications as sensors and actuators in structural control and robotics. The advances of actuating materials, however, recently encountered a severe reliability issue. For a better understanding toward this issue, scientific efforts are of paramount significance to gain a deep insight into the intricate deformation and failure behaviors of actuating materials. To examine the state of the art in this subject, the general assembly of IUTAM approved in August, 2002 at Cambridge University, UK, a proposal to hold an IUTAM symposium to summarize the relevant research findings. The main themes of the symposium are: (i) the constitutive relations of actuating materials that couple mechanical, electrical, thermal and magnetic properties, as well as incorporate phase transformation and domain switch; (ii) the physical mechanisms of deformation, damage, and fatigue crack growth of actuating materials; (iii) the development of failure-resilient approaches that base on the macro-, meso-, and micro-mechanics analyses; (iv) the investigation of microstructural evolution, stability of phase transformation, and size effects of ferroelectric ceramics, shape memory alloys, actuating polymers, and bio-actuating materials. The above problems represent an exciting challenge and form a research thrust of both materials science and solid mechanics. The IUTAM Symposium (GA.

Further information

Illustrations Note:
XVII, 317 p.
Table of Contents:
Preface; Committees and Sponsors; List of Participants; Session Programs; Ferroelectrics: A switching rule for local domain wall motions and for macroscopic material response of ferroelectrics, by H. Kessler, P. Bürmann and H. Balke; The effects of sieving method and poling approach on the internal bias field in donor doped PZT ceramics, by D.N. Fang and F.X. Li; Interaction between defects and domain walls in piezoelectric materials, by D. Gross and R. Mueller; In-situ observation of electrically induced fatigue crack growth for ferroelectric single crystals, by F. Fang, W. Yang , F.C. Zhang and H.S. Luo; Crack initiation and crack propagation under cyclic electric loading in PZT, by I. Westram, D.C. Lupascu and J. Rödel; Multiaxial behavior of ferroelectric ceramic PZT53, by Q. Wan, C.Q. Chen and Y.P. Shen; Stability analysis of 180o domains in ferroelectric thin films, by B. Wang, C. H. Woo and Y. Zheng; Stress analysis in two dimensional electrostrictive material under general loading, by Z.B. Kuang and Q. Jiang. Piezoelectrics: Effect of electric fields on fracture of functionally graded piezoelectric materials, by N. Noda and C.F. Gao; The charge-free zone model for conductive cracks in dielectric and piezoelectric ceramics, by T.Y. Zhang; Electric potential drop across a crack in piezoelectrics, by Y.H. Chen and Z.C. Ou; Elastic Sv-wave scattering by an interface crack between a piezoelectric layer and an elastic substrate, by B. Gu, S.W. Yu and X.Q. Feng; A micro-macro approach to design active piezoelectric fiber composites, by H. Berger, S. Kari, N. Bohn, R. Rodriguez and U. Gabbert; FEM-techniques for thermo-electro-mechanical crack analyses in smart structures, by M. Kuna; Trefftz plane element of piezoelectric plate with p-extension capabilities, by Q.H. Qin; On piezoelectric actuator layers in plates and shells at large deflection, by S. Lentzen and R. Schmidt; Electric charge loading of a piezoelectric solid cylinder, by Y. Chen and R.K.N.D.Rajapakse; Oblique propagation of time harmonic waves in periodic piezoelectric composite layered structures, by M. Urago, F. Jin, Y. Mochimaru and K. Kishimoto; Scattering behaviour of elastic waves in 1-3 piezoelectric ceramics/polymer composites, by F. Jin, K. Kishimoto, Z. Qian and Z. Wang; Stress Analysis for an Anisotropic Solid with Variable Off-Axis of Anisotropy, by K. Watanabe; Shape Memory Alloys Deformation instability and pattern formation in superelastic shape memory alloy microtubes, by Q. P. Sun and P. Feng; Theoretical consideration on the fracture of shape memory alloys, by W.Y. Yan and Y.W. Mai; 3D finite element simulation for shape memory alloys, by L.H. Han and T.J. Lu; Magnetostrictive Materials and Actuating Structures Constitutive Models for Magnetostrictive Materials, by X.J. Zheng and X.E. Liu; Vibration analysis of a nonlinear magnetostrictive actuator, by Z. Zhong and Y.P. Wan; Test study of the feed-support system for a large radio telescope, by G.X. Ren, W.B. Zhu, H. Zhang, L.C. Zhu and Q.H. Lu. Biological Actuating Materials: Biofilm growth: perspectives on two-phase mixture flow and fingerings formation, by S. Hao, B. Moran and D. Chopp; Damage and fatigue of actuating heart muscles, by X.M. Zhang, F. Yang, N.K. Ma Y. Zhao and W. Yang; Author Index.
Yang, W.;Yang
One of the well-selling series of IUTAM Symposia

A quite active subject that just began about 10 years ago

Will be collected by major university libraries

Contributions by world renowned scientists in this area

Media Type:
Springer Netherland
Number of Pages:

Master Data

Product Type:
Hardback book
Release date:
20 March 2006
Package Dimensions:
0.241 x 0.163 x 0.02 m; 0.454 kg
We use cookies on our website to make our services more efficient and more user-friendly. Therefore please select "Accept cookies"! Please read our Privacy Policy for further information.